Always do a quality job and getting these irons in with ferrules that look awful and shafts that have not been fitted correctly into the heads was a job that just needed doing and doing right.  The after picture shows what they should look like!!

Hot Launch E521 Wedges

The extreme Game Improvement Hot Launch E521 wedge features a super-wide Houdini sole that puts more weight below and behind the ball making it extremely easy to get the ball into the air and out of tough lies.

The dual-flange sole design features 14-degrees of bounce allowing the wedge to glide through the turf or sand without digging in and promotes extreme open-face wedge shots.

Houdini Sole - The patented Houdini Sole and its curved leading edge reduced turf interaction by 35%, promoting a “no dig” design and leading significantly less “duffs”, caused by hitting up on the ball and hitting the turf at a lower point before the ball.

Super-Wide Sole - The super-wide sole and heavier head weight of the E521 Wedge helps to eliminate flubs for superior contact. It is engineered to versatility by adding extreme performance benefits to chipping, pitch shots, explosion shots out of the sand, shots out of the rough, flop shots and with bump-and-run shots.

Super-Deep Undercut Cavity - This extremely deep undercut cavity dramatically lowers the Center of Gravity for the ultimate in wedge forgiveness. It redistributes mass for enhanced flight control and to create a higher launch with increased spin for extreme playability from the sand and rough.

Extra Large Face Design - An oversized face design on the E Series wedge provides more striking area for enhanced consistency and accuracy. It also raises the Moment of Inertia (MOI) for enhanced precision around greens. enhance playability from the sand and rough

Maximized Grooves - The grooves of the E521 Wedge are maximized to USGA depth and sharpness to provide maximum spin and control.

Available Lofts in Right-Handed: 52-degree, 56-degree, 60-degree

Available Lofts in Left-Handed: 52-degree, 56-degree, 60-degree

Stock Shaft/Graphite: Mitsubishi Fubuki HD (55-gram L-Flex, 55-gram A-Flex, 55-gram Regular Flex, 60-gram Stiff Flex)

Stock Shaft/Steel: KBS Max 80 Uniflex

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

Hot Launch C521 Iron

The Competition Spec 521 irons are maximum distance and forgiveness irons in a traditional cavity back design. The Hot Launch C521 Irons are made with the extremely soft 431 stainless steel, providing the optimal feel for players of all levels.

Undercut Cavity - The C Series irons incorporate an expanded undercut cavity to provide maximum forgiveness, power, and consistent performance. The expanded undercut cavity back design delivers an increased repulsion effect for high-speed power off the face and a higher launch angle and enhanced forgiveness.

Wider Sole Design - A 15% wider sole lowers the Center of Gravity and offers superior bounce and increases launch for cleaner, high-flying shots. The wider sole design leads to cleaner turf interaction for more consistent shot making.

Chamfered Face - A Chamfered Face around the topline and leading edge of the iron allowed for an increase in face height and topline thickness without affecting the traditional shape of the Hot Launch C521 Irons.

Advanced Toe Weighting - Advanced toe weighting technology in the C521 Iron maximizes stability on impact and provides better off-center hit distance from the face of the iron. The strategically placed toe wight elongates the sweet spot and pure feel off the face of the irons.

Power Lofted - The lower and deeper Center of Gravity allowed the C521 irons to be power-lofted for added distance and lower spin with the same launch characteristics as a standard lofted iron. This makes for a modern long-distance iron design that will provide extra distance and straighter shots with the same apex height expected from each iron.

Premium Aldila Rogue Shaft and KBS MAX 80 Shafts - The mid-high launch, mid-spin shaft Aldila Rogue shaft was chosen for the Hot Launch C Series due to their even release for players that like a smooth, active feel by using advanced, high-modulus Graphitic Carbon Fibers. The C521 Iron is also available in a KBS MAX 80 steel shaft, a lightweight low-kick point steel shaft that produces a high trajectory.

Available Lofts in Right-Handed: #4/22-degree, #5/25-degree, #6/28-degree, #7/31-degree, #8/35-degree, #9/40-degree, P/44-degree, A/49-degree, S/54-degree, L/59-degree

Available Lofts in Left-Handed: #4/22-degree, #5/25-degree, #6/28-degree, #7/31-degree, #8/35-degree, #9/40-degree, P/44-degree, A/49-degree, S/54-degree, L/59-degree

Stock Shaft/Graphite: Aldila Rouge (55-gram L-Flex, 55-gram A-Flex, 65-gram Regular-Flex, 65-gram Stiff Flex and 65-gram X-Flex)

Stock Shaft/Steel: KBS Max 80 R, S

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

Hot Launch E521 Iron-Woods

The E521 Iron-Wood offers the game-changing Houdini Sole in conjunction with a super-shallow face, slice-fighting offset designs, and heel weighting for added draw bias.

These amped-up irons put a major emphasis on ease of launch, playability and correcting miss-hits and slices to go straighter for the ultimate in ease of use.

Houdini Sole Technology – The Houdini Sole is an emerging sole design innovation that pushes weight back as much as possible for an ultra-low and deep Center of Gravity, optimizing launch conditions and greatly improving forgiveness off the face.

The raised steel mass area of the Houdini Sole at the rear of the clubhead reduces the amount of sole area to reduce drag and turf interaction. The Houdini Sole design element has proven to be one of the most effective technologies at getting balls out of tough lies by reducing turf interaction by 35%.

Hollow-Body Design- Hollow-body perimeter weighting produces distance properties of a metalwood in an iron design for maximum ball speed. The hollow-body design makes for an extremely low and back Center of Gravity, helping to create a very forgiving and powerful face.

Shallow Cup Forged Face - The super-shallow Cup Face design in the Hot Launch E521 Iron-Wood produces higher launch angles and extreme ease of launch. This super-thin forged face design produces the pinnacle of extreme ease of launch, increased apex heights, hang time and distance.

Slice-Fighting Offset Design – The offset design of the E521 Iron-Wood works in conjunction with the heel weight in the clubhead to help players avoid hitting slices and to increase launch conditions.

Premium Mitsubishi Fubuki and KBS MAX 80 Shafts - The E Series Iron-Wood comes stock with the same super-light FUBUKI metalwood shafts by Mitsubishi that range from 55-grams to 60-grams depending on the flex and provides lower kick points that promise to help players achieve maximum velocity and a slightly drawn ball flight. The E521 Iron-Wood is also available in a KBS MAX 80 steel shaft, a lightweight low-kick point steel shaft that produces a high trajectory.

Available Lofts in Right-Handed: #3/20-degree, #4/23-degree, #5/26-degree, #6/29-degree, #7/32-degree, #8/36-degree, #9/40-degree, P/44-degree, A/49-degree,  G/52-degree*, S/56-degree*, L/60-degree* (*indicates the Hot Launch E521 Wedge is available as part of the 521 Iron-Wood set)

Available Lofts in Left-handed:  #3/20-degree, #4/23-degree, #5/26-degree, #6/29-degree, #7/32-degree, #8/36-degree, #9/40-degree, P/44-degree, A/49-degree, G/52-degree*, S/56-degree*, L/60-degree* (*indicates the Hot Launch E521 Wedge is available as part of the 521 Iron-Wood set)

Stock Shaft/Graphite: Mitsubishi Fubuki HD (55-gram L-Flex, 55-gram A-Flex, 55-gram Regular Flex, 60-gram Stiff Flex)

Stock Shaft/Steel: KBS Max 80 R, S

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize

Hot Launch C521 Hybrid

This Competition Spec Hot Launch C521 Hybrid is for the player seeking optimal launch and spin rates in a minimal offset design, while still enjoying the benefits of extreme playability.  

An extremely high Moment of Inertia (MOI) tightens dispersion and increases overall accuracy in this compact hybrid design.

Diamond Face/ Cup Face Technology - The Hot Launch C Series hybrid features Tour Edge’s breakthrough Diamond Face technology with 29 different thick and thin diamond shapes behind the face of the metals for an enhanced sweet spot. Different variables of thick and thin diamond shapes or “mini-trampolines” behind the face produce a hotter face with faster ball speeds and better performance on off-center hits.

The Hot Launch C521 features a deeper Cup Face design provides more contact points on the face that results in better off center hit distance, while the forged steel crown creates faster ball speeds.

High Moment of Inertia/Rear Sole Weighting - More weight in the rear sole, created by the new weight in the extreme back of the clubhead moves the Center of Gravity deep in the head for an extremely high MOI.  This low and rear Center of Gravity positioning creates increased launch angles, apex heights, hang time and overall distance.

Acoustic Engineering - Acoustic Ribbing Channels on the inside of the club head help create upgraded acoustic engineering sound properties to by enriching the sound and feel of the club head.

Power Channel - A 25% deeper Power Channel on the sole behind the face is creates better weight distribution and increased face flexing. The Power Channel delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face. 

Premium Aldila Rogue Shaft - The mid-high launch, mid-spin shaft Aldila Rogue shaft was chosen for the Hot Launch C Series due to their even release for players that like a smooth, active feel by using advanced, high-modulus Graphitic Carbon Fibers.

Available Lofts in Right-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree

Stock Shaft: Aldila Rouge (55-gram L-Flex, 55-gram A-Flex, 65-gram Regular-Flex, 65-gram Stiff Flex and 65-gram X-Flex) 

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

Hot Launch E521 Hybrids

The Extreme Game Improvement Hot Launch E521 Hybrids offers the game-changing Houdini Sole in conjunction with a super-shallow face, slice-fighting offset designs, and heel weighting for added draw bias, making this hybrid all about ease of use

The 17-4 stainless-steel Hot Launch E521 Hybrids features a thinner and lighter forged steel crown that increases ball speed for the ultimate in power creation.

Houdini Sole Technology - The Houdini Sole is an emerging sole design innovation that pushes weight back as much as possible for an ultra-low and deep Center of Gravity, optimizing launch conditions and greatly improving forgiveness off the face.

The raised steel mass area of the Houdini Sole at the rear of the clubhead reduces the amount of sole area to reduce drag and turf interaction. The Houdini Sole design element has proven to be one of the most effective technologies at getting balls out of tough lies by reducing turf interaction by 35%.

30% Further Back Center of Gravity- The Houdini Sole was instrumental in significantly altering the Center of Gravity placement of the E521 hybrid. The Center of Gravity is 30% further back than its predecessor, making E521 the highest launching and easiest to hit hybrid Tour Edge has produced. It also helped raise the Moment of Inertia (MOI) of the clubhead by 9%.

Slice Fighting Offset/Shallow Cup Face Designs - The super-shallow Cup Face design in the Hot Launch E521 Hybrid produces higher launch angles and extreme ease of launch. The E521 offset designs are engineered to help golfers avoid hitting slices and to increase launch conditions.

Premium Mitsubishi Fubuki Shaft - The E Series Hybrid comes stock with the same super-light FUBUKI metalwood shafts by Mitsubishi that range from 55-grams to 60-grams depending on the flex and provides lower kick points that promise to help players achieve maximum velocity and a slightly drawn ball flight.

Available Lofts in Right-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree

Available Lofts in Left-Handed:  #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree

Stock Shaft: Mitsubishi Fubuki HD (45-gram L-Flex, 50-gram A-Flex, 50-gram Regular Flex, 55-gram Stiff Flex)

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

Hot Launch E521 Fairway Metals

The Extreme Game Improvement Hot Launch E521 Fairway Metal offers the game-changing Houdini Sole in conjunction with a super-shallow face, slice-fighting offset designs, and heel weighting for added draw bias.

The 17-4 stainless-steel Hot Launch E521 Fairway Metal features a thinner and lighter forged steel crown that increases ball speed for the increased power creation and the ultimate in ease of use.

Houdini Sole Technology - The Houdini Sole is an emerging sole design innovation that pushes weight back as much as possible for an ultra-low and deep Center of Gravity, optimizing launch conditions and greatly improving forgiveness off the face. The raised steel mass area of the Houdini Sole at the rear of the clubhead reduces the amount of sole area to reduce drag and turf interaction. The Houdini Sole design element has proven to be one of the most effective technologies at getting balls out of tough lies by reducing turf interaction by 35%.

Heel Weighted/Slice Fighting Offset/Shallow Cup Face Designs - The super-shallow Cup Face design in the Hot Launch E521 Fairway produces higher launch angles and extreme ease of launch. The strategically placed heel draw-bias weighting of the E Series offset designs are engineered to help golfers avoid hitting slices.

Control Length Shaft Technology - Control Length Shafts Technology is optimized shorter shaft lengths that were designed specifically for the E Series metals to greatly improve accuracy, control and to offer maxed out Smash Factor ratings for the club head. The Control Length shaft system leads to more players hitting the center of the clubface with better overall driving stats. 

Premium Mitsubishi Fubuki Shaft - The E521 Fairway Metal comes stock with super-light FUBUKI metalwood shafts by Mitsubishi that range from 45-grams to 55-grams depending on the flex and provides lower kick points that promise to help players achieve maximum velocity and a slightly drawn ball flight.

Available Lofts in Right-Handed: 16° 3-wood, 20° 5-wood, 23° 7-wood, 25° 9-wood, 27° 11-wood

Available Lofts in Left-handed:  16° 3-wood, 20° 5-wood, 23° 7-wood

Stock Shaft: Mitsubishi Fubuki HD (45-gram L-Flex, 50-gram A-Flex, 50-gram Regular Flex, 55-gram Stiff Flex)

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize

Hot Launch C521 Fairway Metals

This Competition Spec Hot Launch C521 Fairway Metal is for the player seeking optimal launch and spin rates with minimal offset designs, while still enjoying the benefits of extreme ease of use and a high Moment of Inertia (MOI) properties that will tighten dispersion and increase overall accuracy.

The Hot Launch 521 fairway metals are constructed of 17-4 stainless steel and features a thinner and lighter forged steel crown that increases clubhead speed for the ultimate in power creation. 

Diamond Face/ Cup Face Technology - The Hot Launch C Series Fairway features Diamond Face technology with 29 different thick and thin diamond shapes behind the face of the metals for an enhanced sweet spot. Different variables of thick and thin diamond shapes or “mini-trampolines” behind the face produce a hotter face with faster ball speeds and better performance on off-center hits.

High Moment of Inertia/Rear Sole Weighting - More weight in the rear sole, created by the new weight in the extreme back of the clubhead, moves the Center of Gravity deep in the head for an extremely high MOI. The low and rear Center of Gravity positioning creates increased launch angles, apex heights, hang time and overall distance.

Acoustic Engineering - As with the driver, Acoustic Ribbing Channels on the inside of the club head help create upgraded acoustic engineering sound properties to by enriching the sound and feel of the club head.

Power Channel - A 25% deeper Power Channel on the sole behind the face is creates better weight distribution and increased face flexing. The Power Channel delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face. 

Premium Aldila Rogue Shaft - The mid-high launch, mid-spin shaft Aldila Rogue shaft was chosen for the Hot Launch C Series due to their even release for players that like a smooth, active feel by using advanced, high-modulus Graphitic Carbon Fibers.

Available Lofts in Right-Handed: 15-degree 3-Wood, 17-degree 4-wood, an 18-degree 5-wood and a 22-degree 7-wood. 

Stock Shaft: Aldila Rouge (50-gram L-Flex, 50-gram A-Flex, 60-gram Regular-Flex, 60-gram Stiff Flex and 60-gram X-Flex)

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

This Competition Spec Hot Launch C521 Driver features minimal offset designs for medium+ tempo swing speeds to attain maximum ball speed and increase forgiveness. 

Hot Launch C Series is for the player seeking optimal launch and spin rates, while still enjoying the benefits of extreme ease of use, forgiveness, and accuracy.
 

Diamond Face/ Cup Face Technology - The 460-cc Hot Launch C521 Driver features Diamond Face technology, a major breakthrough in face technology that features 39 different thick and thin diamond shapes or “mini-trampolines” behind the face, producing a hotter face with faster ball speeds and better performance on off-center hits.

High Moment of Inertia/Rear Sole Weighting - This new design featuring a back weight to the extreme rear of the driver makes for an extremely high Moment of Inertia (MOI) rating surpassing 5000 Grams per cubic centimeter squared, making the C Series Driver an extremely stable and powerful driver. This increased MOI will increase ball speed on miss-hits and will keep shots straighter, while the back and low Center of Gravity positioning creates high-flying, powerful tee shots.

Acoustic Engineering - Vastly upgraded acoustic engineering is achieved though Acoustic Ribbing Channels on the inside of the club head that provide top-shelf sound and feel.

Power Channel - The Power Channel on the sole of the club behind the club face is 25% deeper for better weight distribution and increased face flexing. The Power Channel delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face. 

Premium Aldila Rogue Shaft - The mid-high launch, mid-spin shaft Aldila Rogue shaft was chosen for the Hot Launch C Series due to their even release for players that like a smooth, active feel  by using advanced, high-modulus Graphitic Carbon Fibers.

Available Lofts in Right-Handed: 9.5°, 10.5°, 12°

Stock Shaft: Aldila Rouge (50-gram L-Flex, 50-gram A-Flex, 60-gram Regular-Flex, 60-gram Stiff Flex and 60-gram X-Flex)

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

The Extreme Game Improvement Hot Launch E-521 Driver features an extreme Moment of Inertia (MOI) with a major emphasis on ease of launch, playability and correcting miss-hits and slices to go straighter.

The 460-cc Hot Launch E521 Driver made from premium 6-4 Titanium is all about ease of use.

High Moment of Inertia – An extremely high MOI rating surpassing 5000 Grams per cubic centimeter squared, making the E Series Driver an extremely stable and powerful driver. This increased MOI will increase ball speed on miss-hits and will keep shots straighter, while the back and low Center of Gravity positioning creates high-flying, powerful tee shots.

Houdini Sole Technology - The Houdini Sole is an emerging sole design innovation from the Tour Edge R&D team that pushes weight back as much as possible in a driver design.

This all new shape and design created extra mass to precisely position weight in the head for an ultra-low and deep Center of Gravity, optimizing launch conditions and greatly improving forgiveness off the face.

Heel Weighted/Slice Fighting Offset/Shallow Cup Face Designs- - The strategically placed heel draw-bias weighting of the E Series offset designs are engineered to help golfers avoid hitting slices. The super-shallow Cup Face design in the Hot Launch E Series Driver produces higher launch angles and extreme ease of launch.

Control Length Shaft Technology - Control Length Shafts Technology is optimized shorter shaft lengths that were designed specifically for the E Series metals to greatly improve accuracy, control and to offer maxed out Smash Factor ratings for the club head. The Control Length shaft system leads to more players hitting the center of the clubface with better overall driving stats.

Premium Mitsubishi Fubuki Shaft - The E521 Driver comes stock with super-light FUBUKI metalwood shafts by Mitsubishi Chemical that range from 45-grams to 55-grams depending on the flex and provides lower kick points that promise to help players achieve maximum velocity and a slightly drawn ball flight.

Available Lofts in Right-Handed: 10.5°, 12.5°, HL/15°
Available Lofts in Left-Handed: 10.5°

Stock Shaft: Mitsubishi Fubuki (45-gram L-Flex, 50-gram A-Flex, 50-gram Regular Flex, 55-gram Stiff Flex)

Grip: Lamkin Z5 Rubber available in Undersize, Standard and Midsize.

We welcome on board as a new outlet for SeeMore Putters Cian McNamara based at Monkstown Golf Club, Parkgarriff, Co Cork, Ireland.  Cian is a fully qualified SeeMore SPi Centre and takes delivery of 10 putters from the SeeMore Black Classic range.  Putters covering blade, small and large mallet, and also a selection of shafts to include the offset, new hosel, and straight shafts will give clients the opportunity to be custom fit to suit their needs and their preferred head and shaft style.

Having a custom fitting for a putter which accounts for approximately 40% of a players shots makes sense and is something that players seem to neglect, rather constantly striving for length with the driver where a little focus on the number of putts per round could be what makes the difference to your handicap.  The right length, loft and lie angle will support players to have the correct posture at set up, and the Rifle Scope Technology of hide the red dot between the two white lines which is a feature on every SeeMore Putter gives you feedback every time and supports a consistent set up for every putt.

Always lovely to receive a Thank you from a happy customer and this was sent to USA Team and copies us in.

After a delay in delivery from UPS of the components eventually got everything in to enable the custom build to commence for 3 sets of Tour Edge Exotics clubs.  Wanted to ensure was able to ship on Monday so working the weekend was required.

Two Sets to the IoM fitted by John Tinsley who works very closely with us.  Exotics EXS220 Driver, FW, Hybrids, and Irons.  Custom built to specifications supplied by John.  Two sets of clubs two totally different requirements.

Third set for a local lady who is having Tour Edge HL4 custom-built Driver, FW, Hybrids, IronWoods, and Irons.

Plenty of time to practice, ready for the new season in 2021 and new handicaps.